View Single Post
  #6  
Old 08-12-2017
WRFinn's Avatar
WRFinn WRFinn is offline
dbw Factory Pro
 
Join Date: Mar 2006
Location: Southcoast nsw
Posts: 563
Unless you have very large feet or your bike has an unusually short gear shifter , I would just take the bolt out , remove the shifter , rotate it up and insert it back on then tighten the bolt . you can get aftermarket shifters that are different lengths but try raising the shifter first . Before you tighten the bolt just sit on the bike and try the position first . If you need to reposition it then it will be easier .
Reply With Quote