dbw - dirtbikeworld.net Members Forums

Go Back   dbw - dirtbikeworld.net Members Forums > Manufacturers > Husaberg Forum

Husaberg Forum For people that like their KTM motor bent over!

Reply
 
Thread Tools Display Modes
  #1  
Old 10-04-2018
shawbagga's Avatar
shawbagga shawbagga is online now
dbw Pro Legend
 
Join Date: Mar 2012
Location: Eaton, WA
Posts: 1,854
FE450 dying when hot.

Mates '12 model(70 degree). Fuel pump been replaced, coil been replaced(what I was certain it was!).
Runs fine with wind through it's gills but stops when in tight going & won't fire until cool again(15-20mins).

Do they have a temp sensor in rads/hoses/thermostat that could shut it down?
What else? Dodgy ECU/ignition? Battery or stator?

Got to be electrical surely!
__________________
Lectronified '10 WR300 & '13 WR125 dingers
Reply With Quote
  #2  
Old 10-04-2018
Craigy's Avatar
Craigy Craigy is online now
dbw Pro Legend
 
Join Date: Mar 2002
Location: Sydney
Posts: 1,396
I've seen this happen with stators.
__________________
CRF 100F 2004
Reply With Quote
  #3  
Old 10-04-2018
Pete40's Avatar
Pete40 Pete40 is offline
dbw Pro Hero
 
Join Date: May 2002
Location: Boggo Rd. Jail
Posts: 12,116
That's the fuel pump issue. Is he sure it was replaced with updated fuel pump under warranty? I got one done even out of warranty.
Reply With Quote
  #4  
Old 10-04-2018
shawbagga's Avatar
shawbagga shawbagga is online now
dbw Pro Legend
 
Join Date: Mar 2012
Location: Eaton, WA
Posts: 1,854
Ktm dealer replaced fuel pump a month ago. Dunno what sort. He has a new stator & rad fan to put on so hopefully it is indeed stator.
__________________
Lectronified '10 WR300 & '13 WR125 dingers
Reply With Quote
  #5  
Old 10-04-2018
gasser nate's Avatar
gasser nate gasser nate is offline
dbw Factory Pro
 
Join Date: Nov 2012
Posts: 781
Screams pick up coil to me.
__________________
Current toys, Subaru powered Manxter buggy, 2018 Gasgas Ec300, Mt-09 Tracer 2016,
Previous toys, TM En300 2016, 2004 Ec300, 2009 Tenere 660, 1996 Cr250, 1984 Yz100, 2006 FZ6, 1981 Z750, 1981 XL250s.

If you could reason with religious people there would be no religious people.. House.
Reply With Quote
  #6  
Old 10-04-2018
shawbagga's Avatar
shawbagga shawbagga is online now
dbw Pro Legend
 
Join Date: Mar 2012
Location: Eaton, WA
Posts: 1,854
Quote:
Originally Posted by gasser nate View Post
Screams pick up coil to me.
Replaced pulser coil is that the same coil?
__________________
Lectronified '10 WR300 & '13 WR125 dingers
Reply With Quote
  #7  
Old 10-04-2018
Nutty's Avatar
Nutty Nutty is offline
The "One" and only
 
Join Date: Apr 2006
Location: Shoalhaven NSW
Posts: 11,391
Quote:
Originally Posted by gasser nate View Post
Screams pick up coil to me.
Me too. Not unknown to get a ratshit replacement SB...

Also. 70 Degree Bergs were notorious for wiring loom failures.

Drop the entire loom out, slice off ALL the spaghetti and check the entire loom.

It's a fair job but but cures every one of them. You can't half do it, just do it. Half a slab job tops.
__________________
"Ain't no use in waking if your dreaming's done" : Pigram Bros.

Current dirtbikes: 2018 450SX, 2018 YZ250-FX
Current road bike: 2011 FLHRC-Police spec
Reply With Quote
  #8  
Old 25-05-2018
Kade's Avatar
Kade Kade is offline
dbw Pro
 
Join Date: Feb 2011
Location: Wagin WA
Posts: 205
Quote:
Originally Posted by Pete40 View Post
That's the fuel pump issue. Is he sure it was replaced with updated fuel pump under warranty? I got one done even out of warranty.
You had a better experience than me then. I bought mine from a Husaberg dealer and when the fuel pump died I called to inquire about warranty and was told that it was a problem they had never heard of but they would love to sell me a replacement for $500.

Don't deal with them anymore. Aftermarket replacement cost $90 and she's been perfect since.
__________________
2010 Berg FE450
1984 IT200
1989 KX250

1990 DT175


Quote:
Originally Posted by Battered Sav View Post
Doesn't matter how smart, right or 'enlightening' the message is, if it's delivered in a shit stained envelope nobody is going to read/heed it.
Reply With Quote
  #9  
Old 25-05-2018
shawbagga's Avatar
shawbagga shawbagga is online now
dbw Pro Legend
 
Join Date: Mar 2012
Location: Eaton, WA
Posts: 1,854
Just to close out this thread(hopefully for his sake) it was the stator it would seem. No issues since putting it in. Put a rad fan in too
__________________
Lectronified '10 WR300 & '13 WR125 dingers
Reply With Quote
  #10  
Old 25-05-2018
choppiektm's Avatar
choppiektm choppiektm is offline
dbw Factory Pro
 
Join Date: Aug 2007
Location: wingham
Posts: 904
Quote:
Originally Posted by shawbagga View Post
Just to close out this thread(hopefully for his sake) it was the stator it would seem. No issues since putting it in. Put a rad fan in too
Thanks for letting us know
__________________
2008 530
15 rmz450 sons
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Diagnosis Dying Bike Interloper GasGas Forum 5 01-02-2015 09:59 PM
Is the 450 a dying breed? MKB KTM Forum 49 04-09-2012 08:33 PM
2T Keeps Dying Scottydee General Bike Related Discussion 17 07-08-2012 04:12 PM
How to tell if your Reg/Rec is dying? crusier Honda Forum 0 19-02-2010 07:39 PM
'06 CRF dying on/after closed throttle when hot disco Honda Forum 42 07-03-2006 09:00 PM


All times are GMT +11. The time now is 05:15 PM.


Powered by vBulletin® Version 3.8.9
Copyright ©2000 - 2018, vBulletin Solutions, Inc.