dbw - dirtbikeworld.net Members Forums

Go Back   dbw - dirtbikeworld.net Members Forums > The Workshop > Tech Talk

Tech Talk Proudly Sponsored by Mainjet Motorcycles

Reply
 
Thread Tools Display Modes
  #1  
Old 04-03-2012
irenemx's Avatar
irenemx irenemx is offline
DBW Expert
 
Join Date: Jan 2012
Location: Sydney NSW
Posts: 135
Post Symptoms of Valve Issues - WR250F 07

Whats are the symptoms of knowing when ur shims need to be inspected/adjusted/changed?

How much should i be expecting to pay for a valve inspection and shims if they need replacing, don't want to get ripped off that all.

I Have a WR250F 2007 with 2,500 kms - Never checked valves

Any feedback would be appreciated

Irene
Reply With Quote
  #2  
Old 04-03-2012
Battered Sav's Avatar
Battered Sav Battered Sav is offline
Foot long Sav
 
Join Date: Oct 2002
Location: Scaring little kids at fancy dress parties.
Posts: 13,654
Typically, worn vales show up as being very hard to start.

At 2500K's I'd say it would be a good idea to have them checked, saying that Yamaha's have a very good reputation as far as valves and wear are concerned.

If you have the bike serviced at the same time it shouldn't add too much to the cost and may be part of the service schedule anyway.

Hopefully someone who knows a bit more will reply.
__________________
Pete.
'02 TL1000R.'04 450 EXC. '05 KX250F

Don't like a post or thread? Click on this icon in the top right of the post.

The opposite of success isn't failure, it's 'giving up'.
Reply With Quote
  #3  
Old 04-03-2012
jbm jbm is offline
dbw Pro
 
Join Date: Nov 2008
Posts: 20
Have not had them close up on my wr250f but have had the problem on a previous bike. With no electric start the bike gets harder to start due to the loss of compression, I used to also notice soot on the rear gaurd from slight oil consumption.

They are not hard to check. Did mine yesterday and I am no mechanic. If you have the manual follow that, although there is no need to remove the radiator. If you can change a spark plug you should be able to check them. Adjusting them is a different issue as you need to play with the timing and be careful with tightening the cam caps.

No doubt in the Honda forum you will find more info on the symptoms of
valve issues
Reply With Quote
  #4  
Old 05-03-2012
Vertex Vertex is offline
dbw Factory Pro
 
Join Date: Oct 2003
Location: Bayswater North, Vic
Posts: 836
to change valve shims would be around $100-150
__________________
'09 KTM200
Reply With Quote
  #5  
Old 05-03-2012
karlmagoo's Avatar
karlmagoo karlmagoo is offline
Former FNT Maestro Extraordinaire
 
Join Date: Jan 2006
Location: In Australia, every 60 seconds, a minute passes..
Posts: 4,570
i get mine checked about every 1000klms, usually not neccesary as they are pretty good, but thats standard, manual states every 500klms, and id rather maintain the bike well, "prevention is better than cure", you,ll save yourself some coin by removing the side guards, seat and fuel tank and making sure its all clean under there otherwise your 1st 45mins @ $65 an hr will go into what is a basic exercise, take it in and should cost you no more than $65 unless the spanners they spin are made from gold, shouldnt take them an hr just for a quick insp/adjust if you have already removed the seat and plastics, shims cost about $5 if you need any, i believe (could well be wrong) the 1 that usually tightens up 1st might be................the centre exhaust maybe?






__________________
The thing about this particular signature is by the time you realise it doesn't say anything it,s too late to stop reading it
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
KTM 200 power valve issues ? newlite Tech Talk 6 26-01-2012 07:28 PM
04 crf250x valve issues Gedcrf250x Honda Forum 22 29-11-2011 09:54 PM
400 Kit on a 250 ... valve issues ? Buzza KTM Forum 2 26-08-2007 06:43 PM
Tyre/Tube Valve Issues Leroy Tech Talk 14 19-10-2005 12:49 AM


All times are GMT +11. The time now is 05:49 AM.


Powered by vBulletin® Version 3.8.9
Copyright ©2000 - 2018, vBulletin Solutions, Inc.