dbw - dirtbikeworld.net Members Forums

Go Back   dbw - dirtbikeworld.net Members Forums > Manufacturers > Beta Forum

Beta Forum My bike is Beta than yours!

Reply
 
Thread Tools Display Modes
  #71  
Old 21-01-2016
crf450's Avatar
crf450 crf450 is online now
dbw Factory Pro
 
Join Date: Dec 2011
Location: B'Rat .. Country Vicco
Posts: 560
All sorted problem solved thxs to Matt at Raceline !!
Looks like it was a simple over adjustment on the throttle, holding the circuit open on the TPS to signal the ECU for more oil ...
He has adjusted it again, and just in case replaced the oil pump anyway to be on the safe-side and the bike is running better at a cold start so far
Will get out next week for a squirt to see if the problem is completely solved but so far it looks very promising !!
__________________
Current edition : Gas Gas EC300 18' .. ringa ding ding
Current Ride .... Sherco - 300 SEF 16' 6days


17' Beta 300rr ... Gone & Sold
Complement the Smoker ... Beta 480rr 15' .... Gone & sold
Beta 250rr 16' ... Gone Written Off .. Xmas Drivers
KTM 250 sx 2013 smoker ... Gone & Sold
KTM 350xcf 2014 ... Gone & sold
YZF 450 11'.. Enduroised ... Gone & Sold
Crf450r 04' ... Gone & Sold
CR 85 07' .. Last of the Smokers ... The daughters weapon
Reply With Quote
  #72  
Old 24-08-2016
michaelf michaelf is offline
dbw Pro Legend
 
Join Date: Nov 2005
Location: Doonan, Sunshine Coast
Posts: 1,280
Very informative thread.

Going to start playing with my jetting, anyone in seq got any setting info they like ?? 16 rr 250

Mostly after bottom end, even at cost of a little mileage if it has to be.

Any info for our climate much appreciated.
__________________
Michael
Reply With Quote
  #73  
Old 07-11-2017
Dasha51 Dasha51 is offline
DBW Dweller
 
Join Date: Nov 2017
Posts: 2
Has any one had issues with jetting on 250RR 2018, bit rich down low? Iíve been advised to try 35 pilot rather than the 38 the manual says is installed. Currently have air screw two turns out to reduce richness at bottom end.
__________________
Beta 250RR 2018
Reply With Quote
  #74  
Old 08-11-2017
crf450's Avatar
crf450 crf450 is online now
dbw Factory Pro
 
Join Date: Dec 2011
Location: B'Rat .. Country Vicco
Posts: 560
Quote:
Originally Posted by michaelf View Post
Very informative thread.

Going to start playing with my jetting, anyone in seq got any setting info they like ?? 16 rr 250

Mostly after bottom end, even at cost of a little mileage if it has to be.

Any info for our climate much appreciated.
NECJ Suzi needle on clip 3
38 PJ
165 MJ
A/S start with 1.5 turns out should get you in the ball park
PV start at 2.5 turns in and adjust to suit ... This should get it somewhere close to nice ...
If you like it a little crisper try the NEDJ on clip 2 .. This is what I prefer personally !!
__________________
Current edition : Gas Gas EC300 18' .. ringa ding ding
Current Ride .... Sherco - 300 SEF 16' 6days


17' Beta 300rr ... Gone & Sold
Complement the Smoker ... Beta 480rr 15' .... Gone & sold
Beta 250rr 16' ... Gone Written Off .. Xmas Drivers
KTM 250 sx 2013 smoker ... Gone & Sold
KTM 350xcf 2014 ... Gone & sold
YZF 450 11'.. Enduroised ... Gone & Sold
Crf450r 04' ... Gone & Sold
CR 85 07' .. Last of the Smokers ... The daughters weapon
Reply With Quote
  #75  
Old 08-11-2017
crf450's Avatar
crf450 crf450 is online now
dbw Factory Pro
 
Join Date: Dec 2011
Location: B'Rat .. Country Vicco
Posts: 560
Quote:
Originally Posted by Dasha51 View Post
Has any one had issues with jetting on 250RR 2018, bit rich down low? Iíve been advised to try 35 pilot rather than the 38 the manual says is installed. Currently have air screw two turns out to reduce richness at bottom end.
Look at dropping a clip position on the needle & stay with the 38 pj
__________________
Current edition : Gas Gas EC300 18' .. ringa ding ding
Current Ride .... Sherco - 300 SEF 16' 6days


17' Beta 300rr ... Gone & Sold
Complement the Smoker ... Beta 480rr 15' .... Gone & sold
Beta 250rr 16' ... Gone Written Off .. Xmas Drivers
KTM 250 sx 2013 smoker ... Gone & Sold
KTM 350xcf 2014 ... Gone & sold
YZF 450 11'.. Enduroised ... Gone & Sold
Crf450r 04' ... Gone & Sold
CR 85 07' .. Last of the Smokers ... The daughters weapon
Reply With Quote
  #76  
Old 12-11-2018
EZZA's Avatar
EZZA EZZA is online now
dbw Pro
 
Join Date: May 2012
Location: Melbourne
Posts: 148
Dragging up an old thread but have recently bought a 2015 250RR Race and am trying to get the jetting in a ball park range before I ride it for the first time Sunday. Bike has a TSP cut head but is otherwise standard. I'm in Vic riding at sea level to 700m at about 15-20deg temp

Have set the float height to just about level with the carb body and current jetting is:

38P
NOZJ Clip 3
170 Main

Thoughts?
__________________
2015 Beta 250 Racing
Reply With Quote
  #77  
Old 12-11-2018
Roon's Avatar
Roon Roon is online now
dbw Pro Legend
 
Join Date: Sep 2003
Location: Sydney
Posts: 1,793
NEDJ clip 2
Reply With Quote
  #78  
Old 12-11-2018
EZZA's Avatar
EZZA EZZA is online now
dbw Pro
 
Join Date: May 2012
Location: Melbourne
Posts: 148
I have an NECJ Suzuki needle at home from my KTM that i'm thinking of trying.

What pilot and main do you run Roon?
__________________
2015 Beta 250 Racing
Reply With Quote
  #79  
Old 12-11-2018
Jakobi's Avatar
Jakobi Jakobi is online now
dbw Pro Addict
 
Join Date: Jul 2008
Posts: 7,063
Quote:
Originally Posted by EZZA View Post
I have an NECJ Suzuki needle at home from my KTM that i'm thinking of trying.

What pilot and main do you run Roon?
Same pilot and main should cross happily between the NOZ and NE series. I'd drop the NECJ in number 3 with the 38/40 pilot and brap on.
Reply With Quote
  #80  
Old 12-11-2018
EZZA's Avatar
EZZA EZZA is online now
dbw Pro
 
Join Date: May 2012
Location: Melbourne
Posts: 148
Quote:
Originally Posted by Jakobi View Post
Same pilot and main should cross happily between the NOZ and NE series. I'd drop the NECJ in number 3 with the 38/40 pilot and brap on.
Ok thanks mate, might give that a try and see how I go. I called TSP and they said most guys that they've done head work for on Beta 250's run the NOZJ with a 165 main here in Vic
__________________
2015 Beta 250 Racing
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
BETA watch out you BETA look out BETA is Sydney Bound!!!!!! threadersmal Beta Forum 21 11-03-2015 05:49 PM
Sell my KTM for BETA whats so different and beta about them ggg Beta Forum 17 13-09-2014 05:49 PM
2013 Beta 250rr (2 stroke) fletch23 Bikes & Quads 4 11-02-2014 09:30 PM
Beta 250rr or husaberg/ktm250 v-tec General Bike Related Discussion 53 08-02-2013 10:00 AM


All times are GMT +11. The time now is 04:57 PM.


Powered by vBulletin® Version 3.8.9
Copyright ©2000 - 2018, vBulletin Solutions, Inc.