dbw - dirtbikeworld.net Members Forums

Go Back   dbw - dirtbikeworld.net Members Forums > Manufacturers > Sherco Forum

Reply
 
Thread Tools Display Modes
  #1  
Old 02-04-2016
jpgibson jpgibson is offline
dbw Pro Legend
 
Join Date: Mar 2010
Posts: 1,354
What did you just do to your Sherco?

Took a turn out of the three Id put on the shock preload, replaced two linkage bearings and greased the rest. There was NOT a lot in there and the bike only has 24h on it. Now all I need is for my shoulder to improve....
__________________
Current dirtbike: 2013 GasGas EC 300 Race
Current roadbike: 2013 Husqvarna Nuda 900R
Reply With Quote
  #2  
Old 02-04-2016
OMC OMC is offline
DBW Clubman
 
Join Date: Aug 2014
Location: Qld
Posts: 1,182
Changed exhaust flange O-rings, checked powervalve cable tension, softened suspension ...I hope I didn't wind the clickers out too far...
Straightened valve stem, tightened rim lock, fuel, air, ready to ride
Reply With Quote
  #3  
Old 02-04-2016
Roon's Avatar
Roon Roon is offline
dbw Pro Legend
 
Join Date: Sep 2003
Location: Sydney
Posts: 1,734
Quote:
Originally Posted by jpgibson View Post
Took a turn out of the three Id put on the shock preload, replaced two linkage bearings and greased the rest. There was NOT a lot in there and the bike only has 24h on it. Now all I need is for my shoulder to improve....
put some grease in it, I think all yours has gone dry....
__________________
www.01moto.com.au
Reply With Quote
  #4  
Old 02-04-2016
AndrewH AndrewH is offline
DBW Expert
 
Join Date: Nov 2008
Location: Southern Qld
Posts: 291
Installed Radiator Braces, Installed Pivot Brake and Clutch levers and put on carbon pipe guard didn't have time for the bark busters so ride tomorrow with out them.
Reply With Quote
  #5  
Old 03-04-2016
shawbagga's Avatar
shawbagga shawbagga is offline
dbw Pro Legend
 
Join Date: Mar 2012
Location: Eaton, WA
Posts: 1,805
Quote:
Originally Posted by AndrewH View Post
didn't have time for the bark busters so ride tomorrow with out them.
Best ya jus order in a new master cylinder now after that statement Andy!
__________________
Lectronified '10 WR300 & '13 WR125 dingers
Reply With Quote
  #6  
Old 03-04-2016
gasser_neil's Avatar
gasser_neil gasser_neil is offline
dbw Factory Pro
 
Join Date: Jul 2012
Location: Narre Warren South
Posts: 825
Took air filter out to clean. Not much else needs be done apart from ride..

Sent from my HTC_0P6B6 using Tapatalk
__________________
Bikes: 2015 Sherco SE-r 300 factory
2012 gasgas ec250 elec start (now a 300)

Previous bike:
97 yammy wr250
2007 zx10r ninja
2004 r1
2004 gsxr1000
2002 aprillia rsv1000
98 gsxr600
95 fzr 600
Reply With Quote
  #7  
Old 03-04-2016
eagle's Avatar
eagle eagle is offline
dbw Pro Legend
 
Join Date: Jan 2006
Location: Nyora vic
Posts: 2,045
Put a new front sprocket & front tyre on ready for some rides, haven't ridden at all yet this year so i'am looking forward to see how the new Star cross 5 will go!
__________________
2000 ktm 400 exc
2015 Sherco 300i 6 day
1986 Honda TLR 250 trials bike x 2
Reply With Quote
  #8  
Old 04-04-2016
brookes2622 brookes2622 is offline
DBW Dweller
 
Join Date: Aug 2015
Posts: 35
Quote:
Originally Posted by eagle View Post
Put a new front sprocket & front tyre on ready for some rides, haven't ridden at all yet this year so i'am looking forward to see how the new Star cross 5 will go!
Lovin my SC5 on the rear.
Reply With Quote
  #9  
Old 05-04-2016
jpgibson jpgibson is offline
dbw Pro Legend
 
Join Date: Mar 2010
Posts: 1,354
Greased my headstem bearings- not really needed as they were well greased!
__________________
Current dirtbike: 2013 GasGas EC 300 Race
Current roadbike: 2013 Husqvarna Nuda 900R
Reply With Quote
  #10  
Old 07-04-2016
chris250 chris250 is offline
DBW Expert
 
Join Date: Dec 2009
Location: Central Coast NSW.
Posts: 561
Bump started it,
Then headed back to the cars.

It has an electrical problem, & no kickstarter.
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
My first Sherco brookes2622 Sherco Forum 6 31-08-2015 10:04 PM
Sherco 2015 300 SEF-R, 300 SE-R and 450 SEF-R impressions & review - Sherco Ride Day mr bergman Sherco Forum 20 17-08-2015 02:02 PM
sherco kwakas Bikes & Quads 0 24-06-2015 10:12 PM
2T 250 Sherco ROBKTM Sherco Forum 7 17-12-2013 07:27 PM
Sherco BIGBADAL General Bike Related Discussion 2 29-06-2007 11:33 PM


All times are GMT +11. The time now is 02:35 AM.


Powered by vBulletin® Version 3.8.9
Copyright ©2000 - 2018, vBulletin Solutions, Inc.