dbw - dirtbikeworld.net Members Forums

Go Back   dbw - dirtbikeworld.net Members Forums > The Workshop > Electrical Forum

Electrical Forum A forum for all the bright sparks!

Reply
 
Thread Tools Display Modes
  #1  
Old 11-01-2019
Beachy Beachy is offline
dbw Factory Pro
 
Join Date: Jan 2009
Location: South Coast
Posts: 518
KTM Speedo Connector

Do you know where I can purchase these connectors ?

http://www.dirtbikeworld.net/forum/a...1&d=1547178382
Attached Images
File Type: jpg IMG_2121.jpg (25.8 KB, 22 views)
__________________
to keep moving forward you must have momentum
Reply With Quote
  #2  
Old 11-01-2019
Nutty Nutty is offline
The "One" and only
 
Join Date: Apr 2006
Posts: 12,094
Both are a available as a Harley Davidson genuine part Steve.

But...I strongly recommend soldering and heat-shrinking the lead ends. That part has no place being fitted where it is on a KTMhuskyaberg. I'll do the job for free if you bring the bits down, takes 10 mins. The assembly can still be removed via the other end.
Reply With Quote
  #3  
Old 11-01-2019
hairyone's Avatar
hairyone hairyone is offline
dbw Pro Champion
 
Join Date: Apr 2004
Location: Canberra
Posts: 4,058
Speaking aloud to myself Nutty: You~that does make alota sense.
Even better; maybe dispense with the mid-connection altogether?

ie. Install a replacement length of cable from pick-up to end-plug?
I haven't seen the pick-up; likely molded plastic & thus impossible.
================================================

Beachy: Many/most of those connectors can be dismantled.
The wire(s) is kinda zip-tied in: Depress it's tab & pull it out.
============================================

Nutty may weigh-in again: I do hope so.
People use Goo to Insulate Connections.

-Anything from Vaseline to better?
I'm provoking some comment here.
=========================

The type of connector doesn't matter if you're replacing it?
Try my suggestion; poke a paper-clip in & pull out the wire?

Any replacement connector would come with brass wire ends?
You may not need to replace those brass wire-ends: Generic?

Hammer-bash a paper-clip on concrete to flatten/sharpen it's end.
You're likely gonna need to suss-pulling those ends sooner or later.
__________________
The More I Learn... The Less I Know.
That Which Doesn't Change... Stays The Same.
Those That Don't Fall... Just Aren't Trying Hard Enough.
Genius or Idiot... Sadly it's Defined by the Mediocre Masses... With their Hindsight.
Dicklaimer... The Text above is to be Evaluated by a Responsible Person... Prior to Any Action Being Taken.

*George Carlin*What We Do*No Bravery*Tell the Truth*911*Genetic Armageddon*Carbon Tax*Interplanetary Climate Change*Fracking*Shock Doctrine*Extinction Protocol*
Reply With Quote
  #4  
Old 11-01-2019
nickb167 nickb167 is online now
dbw Factory Pro
 
Join Date: Apr 2011
Location: Sydney
Posts: 564
http://www.cycleterminal.com/jst-jwpf.html

or

https://au.element14.com/c/connector...ge=jwpf-series
__________________
2014 Husaberg FE501
2005 300 EXC
Reply With Quote
  #5  
Old 11-01-2019
Beachy Beachy is offline
dbw Factory Pro
 
Join Date: Jan 2009
Location: South Coast
Posts: 518
Quote:
Originally Posted by Nutty View Post
Both are a available as a Harley Davidson genuine part Steve.

But...I strongly recommend soldering and heat-shrinking the lead ends. That part has no place being fitted where it is on a KTMhuskyaberg. I'll do the job for free if you bring the bits down, takes 10 mins. The assembly can still be removed via the other end.
Thanks, Nutty
This is the upper end that connects to the speedo. I've already soldered and heat-shrink the lower end, numerous times where it connects to the pick-up.
I would like to have the original connection if possible.
__________________
to keep moving forward you must have momentum
Reply With Quote
  #6  
Old 11-01-2019
Beachy Beachy is offline
dbw Factory Pro
 
Join Date: Jan 2009
Location: South Coast
Posts: 518
Thank you Hairyone.
The male connector that connects to the speedo has corroded and not allowing the pulse from the pick to be sent to the speedo.

Thank you, Nick. Parts have been ordered from element14 in Sydney.

__________________
to keep moving forward you must have momentum
Reply With Quote
  #7  
Old 11-01-2019
burns208's Avatar
burns208 burns208 is offline
dbw Pro
 
Join Date: Jul 2008
Posts: 261
__________________
KTMKTMKTMKTMKTMKTMKTMKTMKTMKTMKTMKTMKTM

My Youtube Channel
Reply With Quote
  #8  
Old 15-01-2019
shawbagga's Avatar
shawbagga shawbagga is offline
dbw Pro Legend
 
Join Date: Mar 2012
Location: Eaton, WA
Posts: 2,079
You can get a brand new TrailTech speedo cable from OEMCycle on Ebay for around $30-$40 delivered if that helps.
__________________
'18 GG XC250!
Reply With Quote
  #9  
Old 15-01-2019
Beachy Beachy is offline
dbw Factory Pro
 
Join Date: Jan 2009
Location: South Coast
Posts: 518
Quote:
Originally Posted by shawbagga View Post
You can get a brand new TrailTech speedo cable from OEMCycle on Ebay for around $30-$40 delivered if that helps.
Thanks, Shawbagga.
Great option if I can't source these little connectors.

Does anyone know the name of these connectors?
__________________
to keep moving forward you must have momentum
Reply With Quote
  #10  
Old 15-01-2019
Jakobi's Avatar
Jakobi Jakobi is offline
dbw Pro Addict
 
Join Date: Jul 2008
Posts: 7,167
Quote:
Originally Posted by Beachy View Post
Thanks, Shawbagga.
Great option if I can't source these little connectors.

Does anyone know the name of these connectors?
http://www.jst-mfg.com/product/detail_e.php?series=152

Trail tech sources them from JST. I got them to send me out a replacement once (I'll have a look and see if I have it and send it to you if you like). Otherwise from above link appears that we have an aussie distributer..

http://www.jstaust.com.au/

Edit: actual connector is 2.0MM PITCH JWPF

Last edited by Jakobi; 15-01-2019 at 02:27 PM.
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Speedo cable connector TE 300 RedDevil Electrical Forum 6 26-04-2018 12:23 PM
Auxiliary Power Connector Kade Husaberg Forum 0 15-09-2015 05:07 PM
Fuel pump connector operation minusone Tech Talk 4 07-04-2014 09:20 PM
electrical connector plugs available separate? gombul KTM Forum 5 07-10-2011 10:27 PM
help, loose headlight connector qwerty1234 General Bike Related Discussion 4 09-12-2007 10:04 PM


All times are GMT +11. The time now is 09:42 AM.


Powered by vBulletin® Version 3.8.9
Copyright ©2000 - 2019, vBulletin Solutions, Inc.