What did you do to ya Beta ?

[dalboy]

Originally Posted by shawbagga

I know the OI is supposed to measure what the bike needs but FMD just seems like a complication for the sake of it & evidently a weak point. I'd 100% just pre mix. It's really not hard.

its easier not to...

i love oi

[gibnut]

I love OI, too.

Still worth an oil tank check, imho.

[gasser nate]

Is the computer that runs the OI a stand-alone item? I love OI and would happily retro fit it to my gassy if it can be done at a reasonable cost. Hopefully Roon can chime in with his knowledge!

[gibnut]

Originally Posted by gasser nate

Is the computer that runs the OI a stand-alone item? I love OI and would happily retro fit it to my gassy if it can be done at a reasonable cost. Hopefully Roon can chime in with his knowledge!

Looks like tps > ecu > oil pump on the wiring diagram.

Leakage was from the oil tank petcock - the rubber o-ring was pinched when the unit was screwed into the tank by the looks.

Cleaned the tank, new oil line, a dab o’ Permatex & judicious cable ties and it’s ready to be re-installed at a later date if desired. I would just need to add a small RC-type filter for the end of the tank vent. You can get them from Ebay for $4.50.

Just going to fit the pre-oi manifold & ride for now.

[Mescaline]

Another one followed me home. 2018 480