Announcement

Collapse
No announcement yet.

91 wmw cr250

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • silverfox
    replied
    WMW. Woody's Motorcycles of Wyong. They complianced CR Honda's from about 83/4 to 99 I believe. Even CR500's if you wanted, Basically about 84 it became mandatory at the 4 day to have a compliance plated bike. Hence the specials that were built. There are a few KX250's floating around done by BTX in vic and a few YZ250,s and RM250;s as well. Only true plated enduro bikes avail were Euro built. Kawasaki stopped the KDX250 in 86? the 200 continued, Suzuki had dropped the PE and the 250X was a trail bike in 85, Honda had the XR's but no 2 strokes, Yamaha had the TT's
    On a side note. If you look at the seat the last part of the white slash is missing and has the WMW logo. I always thought they were a stock seat with the logo on it, but seems they may have had the seat covers made?? anybody shed any light? might only be on this model?? 91

    Leave a comment:


  • Craigy
    replied
    Two guys I used to ride with had them. Basically a stock CR with lights and a compliance plate. They were late teens early twenties at the time and I can remember them sideways everywhere with lots of roost when they weren't in the air of every small mound.

    Leave a comment:


  • axel
    replied
    WMW250, WMW125, WMW80 even.

    There are pages from a mag of the time here : http://forum.ozvmx.com/index.php?topic=24094.0

    Had to look closely to find the word writer, thought it may even have been Wazza. It looks like Clubby wrote it.

    Leave a comment:


  • Motoxfox
    replied
    Aaaah Ok a Shop Special
    Hand Feckled to perfectomundo !

    Leave a comment:


  • eagle
    replied
    Woody's Motorcycles Wyong

    Leave a comment:


  • Motoxfox
    replied
    Slvrfox This is Now post No. 9
    And whilst I was away doing Dad duty during the late eigthies / early nineties

    SO i have a broad idea as to - 250
    Even CR
    .
    .
    .
    But W T F is ...wmw ?? referencing to ?

    Guess = Wally Mc Walters bike ??


    Cheers
    MoFx

    Leave a comment:


  • Spac
    replied
    MX box. There were wide ratio gearsets available from the USA in the day, but this was at a time when our dollar was lucky to break US$0.60 (oh, wait...) so nobody could justify the cost.
    If thereís any of those gearsets in Australia, then you would be super lucky to have bought the bike with it fitted.

    Leave a comment:


  • silverfox
    replied
    Originally posted by Team200 View Post
    Wow thatís so cool. My dream bike as a kid too.
    Does it have the wide ratio box etc?
    don't think so. As far as I know they just ran the mx box?

    Leave a comment:


  • Team200
    replied
    Wow thatís so cool. My dream bike as a kid too.
    Does it have the wide ratio box etc?

    Leave a comment:


  • nocams
    replied
    Holy sheet !,$327 for the dog bone new from Japan.

    Leave a comment:


  • silverfox
    replied
    Originally posted by Spac View Post
    Nice. The 91 CR would have been an awful bike in the bush when it was new, but three decades on we know a lot more about suspension setup and Iím sure that youíll be able to make it entirely rideable.

    Are you on the 90s Retro Enduro page on FaceSook?
    yes I am.. Hope to rego it and cruise around!!

    Leave a comment:


  • Spac
    replied
    Nice. The 91 CR would have been an awful bike in the bush when it was new, but three decades on we know a lot more about suspension setup and Iím sure that youíll be able to make it entirely rideable.

    Are you on the 90s Retro Enduro page on FaceSook?

    Leave a comment:


  • axel
    replied
    That's awesome. Great find!

    Leave a comment:


  • nocams
    replied
    My dream machine 30 years ago!
    Your perseverance will pay off.

    Leave a comment:


  • silverfox
    started a topic 91 wmw cr250

    91 wmw cr250

    Picked this bike up a few years ago. Chased it for 10years. Lost track of it 5 years ago and then it popped up about 2 years later as a basket case, and managed to get it back. Starting to track bits down getting ready to assemble. Just pulled it all out of the boxes it came in to see what's missing. Did the motor and frame a few months back. Needs a lot of work but it will get there. Chasing a rear dog bone if anybody has one

    Sent from my SM-G935F using Tapatalk
antalya escort
medyumlar
huluhub.com
kartal escort
ankara escort
Working...
X